Category: Blog Cat 1

Written by AJ Services Group | Published on June 2025 Electrical fault finding is the process a licensed electrician uses to identify and locate the

Written by AJ Services Group | Published on June 2025 A Level 2 electrician is a licensed electrical worker with special authorisation from Ausgrid or

Written by AJ Services Group | Published on June 2025 An RCD safety switch is a protective device installed in your switchboard that cuts electricity

Written by AJ Services Group | Published on June 2025 The most common signs you need a switchboard upgrade include frequently tripping circuit breakers, flickering

Written by AJ Services Group | Published on July 2025 A roller door that stops halfway is almost always caused by one of six issues:

Written by AJ Services Group | Published on June 2025 A roller door that refuses to open or close properly is almost always caused by

Written by AJ Services Group | Published on July 2025 A roller door remote that suddenly stops working is usually caused by a flat battery,

Written by AJ Services Group | Published on July 2025 No, a roller door that is off its track is not safe to use. Forcing

Written by AJ Services Group | Published on June 2025 Industrial roller doors should be professionally serviced at least every 6 to 12 months, depending

Written by AJ Services Group | Published on June 2025 Minor dents and bends in roller door slats can usually be repaired for $80 to